Is your wireless doorbell not working? You’re in the right place.
Learning how to fix wireless doorbells might seem like a complicated process. However, it can actually be a lot simpler than you might think. You don’t necessarily need to hire a professional to figure out where a problem with your unit is coming from.
Whether your wireless devices are suffering from interference or your doorbell button seems to be stuck, there are things you can do to get your system working properly again. Today, we’ll take a closer look at some of the most common issues with wireless doorbells and how you can fix them as quickly and painlessly as possible.
Why Is Your Wireless Doorbell Not Working?
The first step in fixing a wireless doorbell is figuring out why it’s not operating as it should. Wireless doorbells work by sending frequency signs to a chime box or receiver within your home. The most common issues connected to wireless doorbells generally come from a poor internet connection or a problem with the power supply.
Here are some of the most typical issues you can troubleshoot if your wireless chime or video doorbell isn’t operating normally.
1. Battery Failures
One of the most common causes behind a wireless doorbell failure is an issue with the battery. A wireless doorbell relies on an internal battery to operate, and this, like any battery, can deteriorate and stop working over time. If your chime box isn’t ringing when you press the doorbell button, this could be a sign the batteries need to replace.
Open your doorbell by removing the cover (this may require the use of a screwdriver) and replace the battery. Ensure you have power going to your chime device too. A fresh set of new batteries could fix the problem. Usually, these products will come with standard plug sections, so you can install them into a traditional indoor outlet.
2. Signal Issues
Before you start putting your hands on your wireless doorbell to try to fix it, it’s important to be aware of its signal and frequencies. Every wireless doorbell comes with range specifications indicating how well the product can work when separated from the chime unit. If your system has power, and the doorbell button seems to be working fine, but you’re not getting any sound, this could be a problem with your signal.
When you get your new doorbell, you should have received some instructions which provide insights into its maximum range. Keep in mind that even a single wall can interfere with how your doorbell works. Check the user manual to ensure you place your chime box and doorbell in the right locations.
3. Wireless Interference
Wireless interference is another common problem faced by people with wireless doorbells. The benefit of these products is that you can operate them without running wires throughout your home. However, unlike their wired counterparts, wireless doorbells can sometimes stop working correctly when another wireless device disrupts their wireless frequency.
The best way to check whether a device with the same frequency is disrupting your doorbell is to turn off all other wireless devices you have and see if your doorbell works. If that’s the case, turn each of them back on, one at a time, to see what might be causing the issue. Once you’ve identified the source of the interference, you might need to change the position of your transmitter to keep it working correctly.
4. Weather Damage
Most wireless doorbells come with a protection rating indicating how well they’ll withstand weather damage caused by the great outdoors. Even if your doorbell is waterproof, it could be exposed to deterioration over time. You may even find that it stops working because it’s too cold or warm outside for it to operate correctly.
If your unit has taken severe weather damage, you should be able to see the evidence when you open it. Look for rusting and water around the inside components of your device. You may be able to fix the doorbell by cleaning it, or you may have to replace it completely.
5. Stuck Buttons
If your wireless doorbell chime continues ringing for a long time, then the button itself could be stuck. You’ll need to remove the doorbell from your door and open it to get access to the internal mechanism. Remove all the screws and clean the surfaces of the button and around the edges using isopropyl alcohol.
This should break down the contaminants and allow your doorbell to work normally again. If cleaning the stuck button doesn’t work, this could be a sign there’s a problem with the interior wiring, doorbell transmitter, or chime unit of your doorbell. At this point, you might need to contact an electrician to help with fixing the wiring, or you may need to consider purchasing a new unit.
Fixing Your Wireless Doorbell
A wireless doorbell can be an extremely convenient tool for any home. It’s a great way to replace some of the endless wires and cables throughout your property. However, there are various issues which can stop the receiver from accessing your device’s signal.
The troubleshooting tips above should give you some insights if you ever need to know how to fix your wireless doorbell. However, you may find the best solution sometimes is just to replace a broken unit.