We all know that feeling of excitement when you first put up a new wallpaper in your home, only to be followed by the dreaded realization that it is riddled with air bubbles. Don’t worry though – we’ve got just the tips for you on how to get bubbles out of wallpaper to get back to their former glory. In this blog post, we’ll explore the tools of the trade needed for getting bubbles out of wallpaper as well as some troubleshooting techniques should anything go wrong. So read on and learn everything there is to know about getting those stubborn air bubbles out once and for all.
Prefer video format? We got you covered.
Table of Contents:
- The Tools of the Trade
The Tools of the Trade
Here are some essential items you’ll need for successful wallpaper removal:
• Wallpaper smoother – This tool is used to press out air bubbles from beneath the paper. It’s important that all air is removed before you start wiping away excess paste with a damp cloth.
• Utility knife – A sharp utility knife is necessary for cutting through stubborn areas of wallpaper or when making precision cuts around outlets and other fixtures in your wall.
• Drop cloths – Protecting your floor from any mess created during removal is key, so lay down drop cloths prior to starting work on your walls.
• Sponge/damp cloth – To wipe away any excess paste after removing old wallpaper or applying new paper, use a damp sponge or cloth to ensure no residue remains behind on the wall surface.
By following the steps outlined above, you should be able to get rid of any bubbles in your wallpaper. Now let’s look at some troubleshooting tips for those tougher cases.
Removing wallpaper can be a daunting task, but with the right tools and techniques it doesn’t have to be. One of the most common issues that arise when removing wallpaper is air bubbles. Air bubbles form when there isn’t enough adhesive on the back of the paper or if it wasn’t applied evenly. Here are some tips for troubleshooting this issue:
Use a Steamer or Heat Gun
Using a steamer or heat gun is an effective way to soften stubborn bubbles and make them easier to remove. When using either tool, you should move slowly over each bubble until it softens and flattens out against the wall. Be sure not to stay in one spot too long as this could cause damage to your walls or wallpaper.
Use Adhesive Remover
If steamers and heat guns don’t work, then you may need to use an adhesive remover such as DIF Wallpaper Stripper Gel or Goof Off Wallpaper Remover Spray. These products will help dissolve any remaining glue so that you can easily peel away any remaining air bubbles without damaging your walls or wallpaper underneath. Just apply liberally onto affected areas and let sit for 10-15 minutes before scraping off with a putty knife or scraper tool.
Patching Holes and Tears
Once all of the air bubbles have been removed, you may find yourself dealing with holes and tears in your newly exposed wall surface from where old pieces of wallpaper were ripped off during the removal process. To fix these up quickly, simply fill them in with spackle paste (available at most hardware stores) followed by sanding down once dry for a smooth finish before painting over top if desired.
Learning how to get bubbles out of wallpaper is easy! In a nutshell, getting rid of wallpaper air bubbles is a tricky task but with the right tools and troubleshooting techniques, you can get it done. With patience and practice, you’ll be able to successfully remove all those pesky bubbles from your wallpaper. So don’t give up hope if you find yourself struggling to get bubbles out of wallpaper – just keep trying until you find success.